Exclusive
jewelry
jewelry
ZL JEWELRY
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]ZL JEWELRYFamily manufacture
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]Article: | Х1710М |
Weight: | 21.90 g. |
Grade: | |
* when changing the grade, the color of the finished product may differ from the image of the product in the photo | |
Insert: |
It is necessary to impose your ring on the most suitable stencil, on which the dimensions are indicated. The contour of the stencil must lie exactly along the inner contour of the ring. When choosing between two sizes, choose the largest.
Download templateYou will need a pen, thread or paper strip about 4 millimeters wide. In this case, the thread should not stretch. Loosely wrap a thread or paper strip around your finger and mark the docking point with a pen. After that, straighten the thread or strip and put it on the size ruler. When choosing between two suitable sizes, choose the larger one.
Download templateCut out the size strip, cut in the designated place, thread the sharp end into the cut - you get a paper ring. Put it on your finger and tighten, but not very tight. The fixed value on the size scale is your ring size.
Download templateCustomized cross in red gold and black enamel coating. On the front side in the center in the form of an overlay is a crucifix in white gold. On the sides are the faces of the saints: the Mother of God and Nicholas in white gold, as well as modeled prayer "Our Father". On the back side is the inscription "Save and Preserve" in Ukrainian and modeled enamel pads. The weight is in accordance with the dimensions, with an approximate total height of 50 mm, the weight of gold in the jewelry is 21.90 grams. The overlays in white gold are rhodium plated. The jewelry model and dimensions can be changed according to the customer's wish.