Exclusive
jewelry
jewelry
ZL JEWELRY
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]ZL JEWELRYFamily manufacture
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]Article: | К6001М |
Weight: | 86.6g. |
Size: | |
Grade: | |
* when changing the grade, the color of the finished product may differ from the image of the product in the photo |
It is necessary to impose your ring on the most suitable stencil, on which the dimensions are indicated. The contour of the stencil must lie exactly along the inner contour of the ring. When choosing between two sizes, choose the largest.
Download templateYou will need a pen, thread or paper strip about 4 millimeters wide. In this case, the thread should not stretch. Loosely wrap a thread or paper strip around your finger and mark the docking point with a pen. After that, straighten the thread or strip and put it on the size ruler. When choosing between two suitable sizes, choose the larger one.
Download templateCut out the size strip, cut in the designated place, thread the sharp end into the cut - you get a paper ring. Put it on your finger and tighten, but not very tight. The fixed value on the size scale is your ring size.
Download templateRope in red gold 585*, with rotating inserts. The rotating inserts have the inscription "Save and Preserve" on the end with blackening. The rotating inserts are based on the face of St. Nicholas the Wonderworker on one side and the rose of winds on the other side. Inserts with black phianites on both sides, diameter 1mm. Also on the rope inserts with the faces of the saints. Lock-box with the inscription "Save and Preserve". Weight of gold in the rope 86.60. The diameter of the rope is 6mm. The length of the rope is 60cm.