Exclusive
jewelry
jewelry
![Seal "V-6"](https://zl.jewelry/./cache/cache_image/5/5bba353dce8b8c9618cde8ce94021623.webp "Seal "V-6"")
![Seal "V-6" Photo-1](https://zl.jewelry/./cache/cache_image/9/971ad0e6829e9d381f19b73444d6f4db.webp "Seal "V-6" Photo-1")
![Seal "V-6" Photo-2](https://zl.jewelry/./cache/cache_image/d/dfcbe76f6dca205168a6645212d1da64.webp "Seal "V-6" Photo-2")
![Seal "V-6" Photo-3](https://zl.jewelry/./cache/cache_image/6/696d9a2dfdd4d67f64ae14e897ab195a.webp "Seal "V-6" Photo-3")
![Seal "V-6" Photo-4](https://zl.jewelry/./cache/cache_image/2/2d95fca137a326a7605a5253ed2be723.webp "Seal "V-6" Photo-4")
![Seal "V-6" Photo-5](https://zl.jewelry/./cache/cache_image/6/6fad0446a0f7b598a0d9636a21bdac65.webp "Seal "V-6" Photo-5")
| Article: | КМ0541M |
| Weight: | 17.11 g. |
| Size: | |
| Grade: | |
| * when changing the grade, the color of the finished product may differ from the image of the product in the photo | |
| Insert: | |
It is necessary to impose your ring on the most suitable stencil, on which the dimensions are indicated. The contour of the stencil must lie exactly along the inner contour of the ring. When choosing between two sizes, choose the largest.
Download templateYou will need a pen, thread or paper strip about 4 millimeters wide. In this case, the thread should not stretch. Loosely wrap a thread or paper strip around your finger and mark the docking point with a pen. After that, straighten the thread or strip and put it on the size ruler. When choosing between two suitable sizes, choose the larger one.
Download templateCut out the size strip, cut in the designated place, thread the sharp end into the cut - you get a paper ring. Put it on your finger and tighten, but not very tight. The fixed value on the size scale is your ring size.
Download template
Guaranteed delivery within 14 days
Gift wrapping as a giftMen's ring with common engine composition in red and white gold color. Weight may vary according to size, ring width is 16.00mm. The center stone is an oval shaped fianite, measuring 7.00x9.00mm. Any other stone can be set according to the customer's wish. On the sides of the signet are set onlays in white gold, in the form of pistons, which are covered with rhodium. It can be made in any size and design, according to the customer's wish.
