Exclusive
jewelry
jewelry
ZL JEWELRY
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]ZL JEWELRYFamily manufacture
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]Article: | X154682M |
Weight: | 19.88 g. |
Grade: | |
* when changing the grade, the color of the finished product may differ from the image of the product in the photo | |
Insert: |
It is necessary to impose your ring on the most suitable stencil, on which the dimensions are indicated. The contour of the stencil must lie exactly along the inner contour of the ring. When choosing between two sizes, choose the largest.
Download templateYou will need a pen, thread or paper strip about 4 millimeters wide. In this case, the thread should not stretch. Loosely wrap a thread or paper strip around your finger and mark the docking point with a pen. After that, straighten the thread or strip and put it on the size ruler. When choosing between two suitable sizes, choose the larger one.
Download templateCut out the size strip, cut in the designated place, thread the sharp end into the cut - you get a paper ring. Put it on your finger and tighten, but not very tight. The fixed value on the size scale is your ring size.
Download templateCross on Eben wood, weight of gold 20 grams at a height of 60 mm with an ear. The base in red gold, crucifix and the face of Demetrius of Solun in white gold covered with rhodium. On the front side of the crucifix in white gold, on the sides of the inserts "XC", ІС", "CS", "GA", which are inside covered with black enamel, on the ear chrisma, the area, which is also covered with enamel. On the back side in the center of the image of Demetrius of Solun in white gold, there are also inserts, which are also covered with enamel.