Exclusive
jewelry
jewelry
ZL JEWELRY
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]ZL JEWELRYFamily manufacture
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]Article: | Х1358М |
Weight: | 22.76 g. |
Grade: | |
* when changing the grade, the color of the finished product may differ from the image of the product in the photo | |
Insert: |
It is necessary to impose your ring on the most suitable stencil, on which the dimensions are indicated. The contour of the stencil must lie exactly along the inner contour of the ring. When choosing between two sizes, choose the largest.
Download templateYou will need a pen, thread or paper strip about 4 millimeters wide. In this case, the thread should not stretch. Loosely wrap a thread or paper strip around your finger and mark the docking point with a pen. After that, straighten the thread or strip and put it on the size ruler. When choosing between two suitable sizes, choose the larger one.
Download templateCut out the size strip, cut in the designated place, thread the sharp end into the cut - you get a paper ring. Put it on your finger and tighten, but not very tight. The fixed value on the size scale is your ring size.
Download templateCross on Eben wood, in a combination of red and white gold. The weight changes in the ratio of dimensions, at approximate height of the cross with an ear 65 mm, weight of gold 22.76 grams. On the front side the basis in the form of overlays in red gold, the crucifixion in the form of overlays, on the ear on the front side of the chrisma. On the ends of the overlays in the form of casts, which are set stones with a diameter of 3mm, on the back side in the center of the image of St. Nicholas the Wonderworker. The image of the saint, overlays and crucifixion in white gold, covered with rhodium. These pads are covered with black enamel. The design and dimensions can be customized.