Exclusive
jewelry
jewelry
ZL JEWELRY
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]ZL JEWELRYFamily manufacture
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]Article: | Х1235М |
Weight: | 37.81 g. |
Grade: | |
* when changing the grade, the color of the finished product may differ from the image of the product in the photo | |
Insert: |
It is necessary to impose your ring on the most suitable stencil, on which the dimensions are indicated. The contour of the stencil must lie exactly along the inner contour of the ring. When choosing between two sizes, choose the largest.
Download templateYou will need a pen, thread or paper strip about 4 millimeters wide. In this case, the thread should not stretch. Loosely wrap a thread or paper strip around your finger and mark the docking point with a pen. After that, straighten the thread or strip and put it on the size ruler. When choosing between two suitable sizes, choose the larger one.
Download templateCut out the size strip, cut in the designated place, thread the sharp end into the cut - you get a paper ring. Put it on your finger and tighten, but not very tight. The fixed value on the size scale is your ring size.
Download templateCross on Eben wood, with gold inlays in red and white gold. The weight is in the ratio of dimensions, with an approximate height with the ear of 60mm, the weight of gold in the cross is 37.81 grams. The end trim and the ear are red gold. On the tilnaya side of the cross in the center in the form of an overlay modeled image of Sergei Radonezhsky, "SP", "SX" and an inset with the name of the face. On the ear on the front side of the image of the angel - guardian. Overlays and crucifix are made of white gold, rhodium-plated. The design can be changed.