Exclusive
jewelry
jewelry
ZL JEWELRY
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]ZL JEWELRYFamily manufacture
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]Article: | Х1621М |
Weight: | 16.35 g. |
Grade: | |
* when changing the grade, the color of the finished product may differ from the image of the product in the photo |
It is necessary to impose your ring on the most suitable stencil, on which the dimensions are indicated. The contour of the stencil must lie exactly along the inner contour of the ring. When choosing between two sizes, choose the largest.
Download templateYou will need a pen, thread or paper strip about 4 millimeters wide. In this case, the thread should not stretch. Loosely wrap a thread or paper strip around your finger and mark the docking point with a pen. After that, straighten the thread or strip and put it on the size ruler. When choosing between two suitable sizes, choose the larger one.
Download templateCut out the size strip, cut in the designated place, thread the sharp end into the cut - you get a paper ring. Put it on your finger and tighten, but not very tight. The fixed value on the size scale is your ring size.
Download templateUnique cross, figurative form in red gold, with niello. On the front side there is the face of Nicholas with an anchor. On the back side there are patterns. Overlay in the form of the image of the saint is made of white gold, covered with rhodium. The weight depends on the dimensions of the jewelry, with an approximate height of 50 mm, the weight of gold in the jewelry 16.35 grams. The design of the jewelry can be changed at the customer's request.