Exclusive
jewelry
jewelry
ZL JEWELRY
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]ZL JEWELRYFamily manufacture
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]Article: | Х1519WL |
Weight: | 22.64 g. |
Grade: | |
* when changing the grade, the color of the finished product may differ from the image of the product in the photo | |
Insert: |
It is necessary to impose your ring on the most suitable stencil, on which the dimensions are indicated. The contour of the stencil must lie exactly along the inner contour of the ring. When choosing between two sizes, choose the largest.
Download templateYou will need a pen, thread or paper strip about 4 millimeters wide. In this case, the thread should not stretch. Loosely wrap a thread or paper strip around your finger and mark the docking point with a pen. After that, straighten the thread or strip and put it on the size ruler. When choosing between two suitable sizes, choose the larger one.
Download templateCut out the size strip, cut in the designated place, thread the sharp end into the cut - you get a paper ring. Put it on your finger and tighten, but not very tight. The fixed value on the size scale is your ring size.
Download templateCross in white gold on a wooden base. On the front side there is a crucifix, on the back side in the center there is an inset with the image of St. George the Victorious. On the central inserts on the front and back side of the coating of black enamel. On the lug on the front side is modeled the symbol "chrisma", on the ends of the cross are set stones, diameter 3.5 mm. The white gold parts are rhodium plated. The weight of gold is in proportion to the dimensions, with the total height of the cross 58 mm, the weight of gold in the jewelry is 22.64 grams. The design can be changed according to the customer's wishes.