Exclusive
jewelry
jewelry
ZL JEWELRY
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]ZL JEWELRYFamily manufacture
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]Article: | Х1415WM |
Weight: | 17.29 g. |
Grade: | |
* when changing the grade, the color of the finished product may differ from the image of the product in the photo |
It is necessary to impose your ring on the most suitable stencil, on which the dimensions are indicated. The contour of the stencil must lie exactly along the inner contour of the ring. When choosing between two sizes, choose the largest.
Download templateYou will need a pen, thread or paper strip about 4 millimeters wide. In this case, the thread should not stretch. Loosely wrap a thread or paper strip around your finger and mark the docking point with a pen. After that, straighten the thread or strip and put it on the size ruler. When choosing between two suitable sizes, choose the larger one.
Download templateCut out the size strip, cut in the designated place, thread the sharp end into the cut - you get a paper ring. Put it on your finger and tighten, but not very tight. The fixed value on the size scale is your ring size.
Download templateCross on a wooden base, with white gold inserts, which are plated with rhodium. The weight is in the ratio of dimensions, with the total height of the cross 60 mm, the weight of gold in the jewelry is 17.29 grams. On the front side in the center of the overlay in the form of a crucifix, on the back side in the center of the overlay with the inscription "Save and Preserve". On the ends of the gold inserts with the image of saints, and images of angels. On the lug on the front side depicted chrisma, on the back side of the anchor. The inserts are covered with niello. The design can be changed at the request of the client.