Exclusive
jewelry
jewelry
ZL JEWELRY
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]ZL JEWELRYFamily manufacture
st. Marszalkowska, 6400-544Poland, Warsaw
+48 730 434 000+48 730 440 000[email protected]Article: | В1046М |
Weight: | 61.83 g. |
Grade: | |
* when changing the grade, the color of the finished product may differ from the image of the product in the photo | |
Insert: |
It is necessary to impose your ring on the most suitable stencil, on which the dimensions are indicated. The contour of the stencil must lie exactly along the inner contour of the ring. When choosing between two sizes, choose the largest.
Download templateYou will need a pen, thread or paper strip about 4 millimeters wide. In this case, the thread should not stretch. Loosely wrap a thread or paper strip around your finger and mark the docking point with a pen. After that, straighten the thread or strip and put it on the size ruler. When choosing between two suitable sizes, choose the larger one.
Download templateCut out the size strip, cut in the designated place, thread the sharp end into the cut - you get a paper ring. Put it on your finger and tighten, but not very tight. The fixed value on the size scale is your ring size.
Download templateBracelet on leather in red gold color. Inserts rotate, on one side of the card suits black diamonds (24pcs) - 1.25mm, and rubies (5pcs) -1.25mm, and on the other side of the card suits on black and red enamel. The intermediate inserts are in white gold and rhodium plated. Lock-box with engraving in the inner part, and with a button on the front side. Lock with two safety locks. The width of the leather is 10mm and the thickness of the leather is 5.3mm. The weight of the gold is approximately 62. grams.