ZL Jewelry · ZL Serwis Biżuterii · Warsaw, Śródmieście

Jewellery repair in central Warsaw — ZL Serwis Biżuterii

ZL Jewelry doesn't just make jewellery — we repair it too. ZL Serwis Biżuterii works out of our family jewellery manufactory, ZL Jewelry Family Manufactory: chain soldering, ring and wedding band resizing, rhodium plating, clasp replacement, engraving — and repairs of any complexity. If a part is missing, we make it from scratch. Two locations in the centre: the manufactory at Marszałkowska 64 and a drop-off point at Browary Warszawskie, Grzybowska 43A.

from PLN 20cleaning; rhodium from PLN 30
1–5 daysstandard repair time
lasersoldering without heating stones
2 locationsMon–Sat 10:00–19:00
Jewellery repair in central Warsaw — ZL Serwis Biżuterii

Complex repairs we have done

Soldering a chain impresses no one. Here is work that ordinary repair shops turn down. Click an example to see photos and how we did it.

The watch movement is disassembled, cleaned, lubricated and reassembled by our trusted partners — an authorised service centre. We restore the gold, case and bracelet, and we are responsible for the watch coming back to you assembled exactly as it should be.

Gold “cobra” watch bracelet

Gold “cobra” watch bracelet — 1Gold “cobra” watch bracelet — 2Gold “cobra” watch bracelet — 3Gold “cobra” watch bracelet — 4

A “cobra” bracelet is a flexible band of gold segments held together by internal hinges. An ordinary watch shop cannot shorten it: the links don't come out like on a steel bracelet, and the band has to be taken apart and soldered again.

At the ZL Jewelry manufactory we shorten gold “cobra” bracelets to the right size, repair damaged segments and the clasp, and restore an even shine afterwards. The joint is invisible and the bracelet stays flexible.

Solid gold watch bracelet

Solid gold watch bracelet — 1Solid gold watch bracelet — 2Solid gold watch bracelet — 3Solid gold watch bracelet — 4

Solid, heavy gold watch bracelets have links that cannot simply be removed. To shorten or lengthen such a bracelet, a link has to be cut out or a new one made — with the same profile, fineness and colour of gold.

We create a 3D model of the link from the original, cast it in gold of the right fineness and build it into the bracelet. We restore broken links and missing clasp parts of gold watch bracelets the same way.

Watch satin finish restoration

Watch satin finish restoration — 1Watch satin finish restoration — 2Watch satin finish restoration — 3Watch satin finish restoration — 4

A satin (brushed, matte) finish gradually collects scratches and uneven shine. Ordinary polishing destroys it — the case ends up glossy where it should be matte.

We restore the satin finish of the watch case and bracelet in the factory brushing direction and bring the polished bevels back to a mirror shine. The watch looks new, with no signs of intervention.

Dents and scratches on a watch

Dents and scratches on a watch — 1Dents and scratches on a watch — 2Dents and scratches on a watch — 3Dents and scratches on a watch — 4

Knocks, dents in the case, deep scratches on the bracelet, traces of a poor earlier repair — we restore the surface of gold, steel and platinum watches: we straighten the geometry, remove defects and restore polished and satin finishes.

The movement is disassembled, cleaned, lubricated and reassembled by our trusted partners — an authorised service centre. We are responsible for the watch coming back to you assembled exactly as it should be.

Gold crown

Gold crown — 1Gold crown — 2Gold crown — 3Gold crown — 4

We made a crown from scratch — from the 3D model through casting and assembly to the final finish — and gold-plated it. It shows that the ZL Jewelry manufactory works not only with jewellery but also with large decorative objects.

If you need a crown, tiara, trophy or decorative object made or restored and gold-plated, tell us about the task and we will choose the technology and plating thickness.

Gold shoe horn

Gold shoe horn — 1Gold shoe horn — 2Gold shoe horn — 3Gold shoe horn — 4

A custom gift: we made a shoe horn at the manufactory and plated it in gold. An even, spotless coating over a large surface is a difficult task that we handle.

We plate other objects in gold, silver or rhodium the same way: pens, accessories, interior details, gifts.

Gilding large and sacred objects

Gilding large and sacred objects — 1Gilding large and sacred objects — 2Gilding large and sacred objects — 3Gilding large and sacred objects — 4

We restore gilding on large objects: chalices, tabernacles, crosses, icon covers, frames and decorative elements. We remove tarnish and old coating, straighten dents and apply new gold or silver plating.

Every object is assessed individually: size, base metal, condition of the coating. We work carefully, preserving engraving and relief.

Remaking old jewellery

Remaking old jewellery — 1Remaking old jewellery — 2Remaking old jewellery — 3Remaking old jewellery — 4

Old, broken or unfashionable jewellery can become something new: we melt down your gold and make wedding rings, a ring, a pendant or earrings from it, to your sketch or our 3D design.

Before we start, we weigh the metal, check the fineness and agree the design. Stones from the old jewellery can be moved to the new piece.

Matching a lost earring

Matching a lost earring — 1Matching a lost earring — 2Matching a lost earring — 3Matching a lost earring — 4

Lost one earring? From the remaining one we create an exact 3D copy, cast it in the same metal and fineness, and match the stones and finish.

We recreate lost pendants, cufflinks and parts of sets the same way — from a sample, a photo or a description.

Joining a wedding band and engagement ring

Joining a wedding band and engagement ring — 1Joining a wedding band and engagement ring — 2Joining a wedding band and engagement ring — 3Joining a wedding band and engagement ring — 4

A wedding band and an engagement ring can be joined into one piece so they don't twist or rub against each other. We solder them neatly, adjust the size and polish — the joint is almost invisible.

Before we start, we check the stones and settings so that heat does not harm them; if needed, we use laser soldering.

New setting for a stone

New setting for a stone — 1New setting for a stone — 2New setting for a stone — 3New setting for a stone — 4

A stone from your grandmother's ring or a worn piece can be moved into a new setting. We carefully remove the stone, design a setting for its size and shape, make it and set the stone.

We change the look of a ring the same way: a different number of prongs, a bezel, side stones — keeping your stone.

Vintage jewellery restoration

Vintage jewellery restoration — 1Vintage jewellery restoration — 2Vintage jewellery restoration — 3Vintage jewellery restoration — 4

We restore old and family jewellery: we straighten deformations, recreate missing elements, reset stones, and clean and polish gently, preserving the character and patina of the era.

Every restoration is agreed in advance: what we restore and what we leave as it is, so the piece keeps its history.

Pearl restringing

Pearl restringing — 1Pearl restringing — 2Pearl restringing — 3Pearl restringing — 4

Pearl thread stretches and gets dirty over time, and without knots between the pearls the whole necklace scatters if it breaks. We restring pearls on new silk thread with a knot between each pearl and replace or repair the clasp.

Before we start, we check the condition of the pearls and clean them gently, without ultrasound.

Gold plating and black rhodium on silver

Gold plating and black rhodium on silver — 1Gold plating and black rhodium on silver — 2Gold plating and black rhodium on silver — 3Gold plating and black rhodium on silver — 4

We plate silver jewellery in gold — yellow or rose — or in black rhodium. The piece gets a new colour and protection against tarnishing.

We restore worn gold plating on jewellery and objects and can plate selected elements only.

Keyboard engraving

Keyboard engraving — 1Keyboard engraving — 2Keyboard engraving — 3Keyboard engraving — 4

Bought a laptop without the letters you need? We laser-engrave Ukrainian or Russian Cyrillic, Polish characters or another layout on the keyboard. Engraving doesn't wear off like stickers.

Turnaround — 3–5 days. We work with MacBooks and other laptops.

Plaques and gift engraving

Plaques and gift engraving — 1Plaques and gift engraving — 2Plaques and gift engraving — 3Plaques and gift engraving — 4

We engrave plaques for trophies, statuettes and awards, and inscriptions on watches (case back), lighters, hip flasks, silver cutlery, lockets and gifts.

We offer standard and custom fonts, monograms and logos — from your file or designed by our designer.

Ring cut-off and restoration

Ring cut-off and restoration — 1Ring cut-off and restoration — 2Ring cut-off and restoration — 3Ring cut-off and restoration — 4

Ring stuck on a swollen finger? We carefully cut it off and then restore it: we solder it, adjust the size and polish it so the cut can't be seen.

If the ring has already been cut at a hospital or elsewhere, we will restore it too.

Repairs others turn down

ZL Serwis Biżuterii is backed by the ZL Jewelry manufactory. So we don't stop at soldering and polishing: if a part is lost, broken or impossible to buy, we recreate it in the right fineness and size.

3D modellingWe recreate a lost part from a photo, an impression or the matching earring.
Printing and castingWe print the model in wax and cast it in gold, silver or platinum of the right fineness.
Laser and settingLaser soldering right next to stones; rebuilding bezels, prongs and settings.
Made to orderBails, clasps, ear wires, ring shanks — from a single part to a full restoration.

Why us

Price before we startThe master inspects the piece and gives an exact price. We never start without your approval.
Our own manufactorySoldering, laser, casting, stone setting, rhodium plating — all done at ZL Jewelry, no middlemen.
A receipt for every pieceDescription, weight and photo at drop-off — you know exactly what you leave and what you'll get back.
No waiting in linePick a day and time online — the master will see you at the agreed time.
Gemologist Yulia Siadneva — gemstone consultations in Warsaw
Gemologist Yulia Siadneva working with precious stones
Gemologist at ZL Jewelry

Gemologist consultation and gemstone selection

Before you buy a stone, move it into a new setting or hand in jewellery with stones for repair, talk to a specialist. A certified gemologist consults at the salon at ul. Grzybowska 43A.

Yulia Siadneva — internationally certified gemologist

Accreditations
  • GIA
  • HRD
  • IGI
  • SSEF (Switzerland)
  • accreditation in Ukraine
How she can help
  • advice on diamonds, sapphires, emeralds and other precious stones
  • choosing a stone for your jewellery, design and budget
  • examining a stone before purchase, resetting or repair
  • advice on caring for and wearing jewellery with stones
WhereKiANIT Jewelry salon, ul. Grzybowska 43A, Warsaw
WhenMon–Fri 10:00–15:00, by appointment
Pricefrom PLN 200, price agreed individually depending on the task

How the repair works

Book or send a photoBook a visit online or send photos on WhatsApp — we give a first estimate.
Inspection and priceThe master inspects the piece and gives the price and lead time. We issue a receipt.
RepairUsually 1–5 working days; laser soldering and complex work 2–4 days, making new parts up to 14 days.
CollectionWe let you know when it's ready. Collect it with your receipt.

Jewellery repair prices

Solderingfrom PLN 30
  • Chain soldering in one place (+ local polishing and ultrasonic cleaning)from PLN 70
  • Hollow chain soldering (+ local polishing and ultrasonic cleaning)from PLN 100
  • Double soldering of a chain / bracelet (loop or link + polishing and ultrasound)from PLN 150
  • Soldering a wedding band, earrings or pendant without precious stones (one spot)from PLN 90
  • Soldering pieces with synthetic stones (one spot)from PLN 100
  • Soldering pieces with precious stones (one spot)from PLN 130
  • Laser soldering in one spot (at the manufactory, 2–4 days, no polishing or cleaning)PLN 30
  • Soldering a link in an earring / pendant without stone (+ new link)PLN 100 + metal
  • Soldering a link in an earring / pendant with stones (+ new link)PLN 150 + metal
  • Non-standard solderingon request
Wedding band resizingfrom PLN 50
  • Sizing a wedding band without stones up or down — classic (up to 1.5 sizes)PLN 50
  • Sizing a wedding band without stones up or down — exclusive (up to 1.5 sizes)from PLN 100
  • Sizing a wedding band without stones up or down — premium (up to 1.5 sizes)from PLN 150
  • Sizing a wedding band down by cutting, without stonesfrom PLN 110
  • Sizing a wedding band down by cutting, with stones (up to 1 size)from PLN 150
  • Sizing a wedding band up with an inserted piece (up to 1 size)PLN 110 + metal
  • Sizing a wedding band up with an inserted piece (1 to 2 sizes)PLN 150 + metal
Ring resizingfrom PLN 50
  • Sizing a ring up by 1 size (stretching)PLN 50
  • Sizing a ring up by 2 sizes (stretching)PLN 80
  • Sizing a ring up by more than 2 sizeson request
  • Sizing down by cutting, without stones (up to 1 size)from PLN 100
  • Sizing down by cutting, without stones (1 to 2 sizes)from PLN 130
  • Sizing down by cutting, without stones (more than 2 sizes)on request
  • Sizing down by cutting, with stones (up to 1 size)from PLN 120
  • Sizing down by cutting, with stones (1 to 2 sizes)from PLN 150
  • Sizing down by cutting, with stones (more than 2 sizes)on request
  • Non-standard ring solderingon request
Mechanical repairfrom PLN 50
  • Straightening a classic wedding band without stones (+ polishing and ultrasound)PLN 50
  • Straightening a fancy wedding band with stones (+ polishing and ultrasound)PLN 80
  • Straightening an earring claspPLN 50
  • Straightening a lobster clasp (depending on complexity)from PLN 50
  • Straightening a pendantfrom PLN 50
  • Straightening a chain / braceleton request
  • Repairing earrings and rings (1 damaged spot, without stones)from PLN 100
  • Repairing earrings and rings (1 damaged spot, with stones)from PLN 150
  • Non-standard straighteningon request
Clasps, posts, springsfrom PLN 50
  • Replacing the spring in a claspPLN 50
  • Replacing one post without solderingPLN 50 + metal
  • Replacing jewellery wire / cord (up to 70 cm, no soldering)PLN 100
  • Replacing jewellery wire / cord (2 solder points, up to 70 cm)PLN 130 + metal
  • Replacing a post in earrings or a bracelet (2 solder points, laser, 2–4 days)PLN 90 + metal
  • Replacing a bracelet / chain clasp without solderingfrom PLN 50 + metal
  • Replacing a bracelet / chain clasp with soldering (+ polishing and ultrasound)from PLN 110 + metal
Making partsfrom PLN 50
  • Link (connecting part) in the required sizefrom PLN 50 + metal
  • Triangular pendant bailfrom PLN 100 + metal
  • Custom pendant bail (7–14 days)from PLN 200 + metal
  • Lever-back clasp without thread (3–5 days)from PLN 50 + metal
  • Lever-back clasp with thread (3–5 days)from PLN 80 + metal
  • Ear wire in the required size (3–5 days)from PLN 80 + metal
  • End cap for a chain or bracelet (3–5 days)from PLN 50 + metal
  • Box clasp / cylinder for wire (7–14 days)from PLN 300 + metal
  • Box clasp (7–14 days)from PLN 500 + metal
  • Prong / claw for settingfrom PLN 50 + metal
  • Setting for a stone up to 5 mm (round)from PLN 50 + metal
  • Setting for a stone over 5 mm (fancy cut)from PLN 100 + metal
  • Ring shank in the required sizefrom PLN 100 + metal
  • Custom jewellery part (7–14 days)on request
Stone settingfrom PLN 10
  • Setting one non-precious stone 1–5 mm (depending on size)PLN 20–50
  • Setting one non-precious stone over 5 mmfrom PLN 50
  • Setting one synthetic or semi-precious stonefrom PLN 50 + stone
  • Setting one precious stone (10% of the stone's value)at the manufactory, on request
  • Removing a non-precious stonefrom PLN 10 / pc
  • Removing a precious stoneat the manufactory, on request
  • Checking stone settingsfrom PLN 50
Polishing and rhodium platingfrom PLN 20
  • Ultrasonic jewellery cleaningPLN 20
  • Polishing: wedding band / ringPLN 30
  • Polishing: pendantfrom PLN 30
  • Polishing: chain / braceletfrom PLN 50
  • Polishing: earrings (pair)from PLN 60
  • Polishing non-standard pieces (3–5 days)on request
  • Rhodium platingfrom PLN 30 / g of the piece
  • Oxidising (patina)on request
  • Enamel coatingfrom PLN 100 / pc
Laser engravingfrom PLN 50
  • Standard font, up to 5 charactersPLN 50
  • Standard font, 5 to 50 charactersPLN 100
  • Standard font, over 50 characterson request
  • Custom font, up to 50 charactersPLN 150
  • Image / monogram — standard design from our libraryPLN 80
  • Image / monogram — from the customer's sketchPLN 120
  • Image / monogram — designed by our designer (1–3 days)PLN 220
  • Photo / logo — engraving without editingPLN 100
  • Photo / logo — engraving with file editing (1–3 days)PLN 150
  • Laptop keyboard (3–5 days)PLN 130
  • Engraving on a non-standard surfaceon request
Watchesfrom PLN 50
  • Watch bracelet adjustment (shortening / lengthening)PLN 50
  • Replacing a leather or rubber strapPLN 100
  • Replacing a metal bracelet (fitting a new one)PLN 130
  • Swiss watch bracelet adjustmentPLN 250–500

Prices may change after technical inspection of the piece. “+ metal” — metal is charged separately at the daily rate. Standard lead time: 1–5 working days.

Repair by post — from anywhere in Poland

Can't come in? Send your jewellery by courier. Our manager will explain how to pack and ship it safely; we repair it and send it back by insured delivery.

Contact the managerMessage us on WhatsApp or send a request — we give a first estimate from photos.
Packing and shippingYou get instructions: how to pack the piece, which courier to use and how to insure the parcel.
Unpacking on videoWe unpack the parcel on video, weigh the piece, issue a receipt and agree the price before work starts.
Repair and deliveryOnce paid, we send the piece back by insured delivery — to your door or a parcel locker.

What people say about us on Google

Reviews from customers of our salons — about repairs, wedding rings and custom jewellery. See for yourself.

4.8
★★★★★494 Google reviews
Google

ZL Jewelry · Marszałkowska 64

5.0
★★★★★116 Google reviews
Google

KiANIT Jewelry · Grzybowska 43A

Google · as of 02.11.2026

Where to find us

Two locations in central Warsaw. Drop your jewellery off at either one — the repair is done by the ZL Jewelry master jeweller.

ZL Jewelry manufactory — shop front
ZL Jewelry manufactory — master jeweller at work
Śródmieście

ZL Jewelry manufactory

ul. Marszałkowska 64, 00-544 WarsawOur master jeweller works here: inspection and price on the spot, small repairs without sending the piece anywhere. Master's phone: +48 452 910 002.Mon–Sat 10:00–19:00 · closed on Sundays and public holidays, open on trading Sundays
KiANIT Jewelry wedding ring salon — salon entrance
KiANIT Jewelry wedding ring salon — salon interior
Wola · Browary Warszawskie

KiANIT Jewelry wedding ring salon

ul. Grzybowska 43A, Browary Warszawskie, WarsawRepair drop-off point — no master jeweller on site. We issue a receipt, pass the piece to the master at Marszałkowska 64 and return it here. The master quotes from photos or after inspection.Mon–Sat 10:00–19:00 · closed on Sundays and public holidays, open on trading Sundays

Book a visit with the master jeweller

Add photos of the piece and briefly describe the repair — we don't quote without photos. Pick a day and time — we'll confirm by text or phone within one working day. No queue, price before we start.

Where *
Preferred time *
Photos of the piece *Required: 1–5 photos of the damaged area in good light. We don't quote repairs without photos.

or send photos of the piece on WhatsApp — we'll quote in advance

ZL Jewelry manufactory · master on siteul. Marszałkowska 64, 00-544 WarsawGet directions
Repair drop-off pointKiANIT Jewelry wedding ring salon, Browary Warszawskie, ul. Grzybowska 43A, WarsawGet directions

Mon–Sat 10:00–19:00 · closed on Sundays and public holidays, open on trading Sundays

Master jeweller's phone+48 452 910 002ZL Jewelry manufactory, ul. Marszałkowska 64 · Mon–Sat 10:00–19:00

Questions and answers

How much does chain soldering cost in Warsaw?

Soldering a chain in one place — from PLN 70, including local polishing and ultrasonic cleaning. Hollow chains — from PLN 100. We give the exact price after inspection.

Can you make a ring smaller or bigger?

Yes. Stretching up by 1 size — from PLN 50, up to 2 sizes — PLN 80. Sizing down by cutting — from PLN 100, with stones — from PLN 120. Wedding bands without stones — from PLN 50 (up to 1.5 sizes).

How long does a jewellery repair take?

Usually 1–5 working days. Laser soldering — 2–4 days; making new parts (bail, clasp) — 3 to 14 days.

What is rhodium plating and how much is it?

Rhodium plating is a thin rhodium coating that restores the shine of white gold and protects silver from tarnishing. From PLN 30 per 1 g of the piece.

Where can I drop off jewellery for repair?

At two places in central Warsaw: the ZL Jewelry manufactory at ul. Marszałkowska 64 (master on site, immediate inspection) and the drop-off point at the KiANIT Jewelry salon, Browary Warszawskie, ul. Grzybowska 43A. Both open Mon–Sat 10:00–19:00 and on trading Sundays.

Can I send jewellery for repair by post?

Yes, we accept repairs from all over Poland. Contact our manager — we'll explain how to pack and send the parcel. We unpack it on video, agree the price, repair the piece and send it back by insured delivery.

Do I need an appointment?

We also accept walk-ins, but with a booking the master will inspect your piece at the agreed time without waiting. You can book online on this page.

Can you quote a repair from a photo?

Yes, send photos on WhatsApp — we'll give a first estimate of price and time. The final price is set after inspection at the manufactory.

Can you remake a lost part?

Yes. ZL Serwis Biżuterii works out of the ZL Jewelry manufactory: we recreate bails, clasps, ear wires, settings, ring shanks and custom parts from a photo or the matching piece. Price on request, lead time 3 to 14 days.

Do you repair jewellery bought elsewhere?

Yes, we repair any gold, silver and platinum jewellery, wherever it was bought.

Do you engrave wedding rings?

Yes, laser engraving: up to 5 characters — PLN 50, 5 to 50 characters — PLN 100, monogram or drawing — from PLN 80.

What we don't repair — and what we offer instead

Some jewellery cannot be honestly repaired. We explain why — and what the ZL Jewelry manufactory can do for you instead.

Resizing a tungsten ring

Resizing a tungsten ring — 1Resizing a tungsten ring — 2

Why we don't take it on

Tungsten and tungsten carbide are extremely hard materials. They cannot be stretched, cut and soldered like gold: any attempt to resize them ends in a crack. That's why an honest jeweller won't take it on.

What we can offer

The ZL Jewelry manufactory can make a ring of the same design in gold in the right size — from a 3D model of your tungsten ring. That ring can be made larger or smaller later.

Ceramic jewellery repair

Ceramic jewellery repair — 1Ceramic jewellery repair — 2

Why we don't take it on

Ceramic rings and bracelets can't withstand heat or stress: cracked ceramic cannot be soldered or glued so that it holds. Resizing a ceramic ring is also impossible.

What we can offer

We can recreate the design in gold or silver, combine metal with a ceramic insert, or repair the metal parts — the clasp, fittings or lock.

Resizing a titanium or steel ring

Resizing a titanium or steel ring — 1Resizing a titanium or steel ring — 2

Why we don't take it on

Titanium and surgical steel rings are very hard and springy. They can't be stretched, and cutting and soldering them in a jewellery workshop does not produce a reliable joint — the ring may crack at the seam.

What we can offer

We'll make the same ring in gold or silver in the right size, or offer a new design at the manufactory.

Repairing plated costume jewellery

Repairing plated costume jewellery — 1Repairing plated costume jewellery — 2

Why we don't take it on

Costume jewellery is brass, copper or an alloy with a thin plating. Soldering and polishing burn the plating off and darken the base metal; a new coating doesn't last long on such metal.

What we can offer

We can recreate your favourite costume piece in silver or gold so it lasts for years. If only the clasp has broken, we'll tell you whether it can be replaced without heat.

Deep hand engraving

Deep hand engraving — 1Deep hand engraving — 2

Why we don't take it on

Deep hand engraving with a graver is a separate craft with its own master engravers. We don't do it, so we never promise a result we can't stand behind.

What we can offer

Laser engraving — inscriptions, dates, monograms, drawings, fingerprints — is done at our manufactory: precise, even and in any font.

Resin and plastic jewellery repair

Resin and plastic jewellery repair — 1Resin and plastic jewellery repair — 2

Why we don't take it on

Jewellery made of epoxy resin, acrylic or plastic melts and deforms under heat, and cracks in resin can't be repaired without a trace.

What we can offer

We repair the metal parts of such jewellery — fittings, rings, clasps — if they can be removed. Or we'll make a similar piece in metal.

Soldering jewellery with amber, opal or pearls

Soldering jewellery with amber, opal or pearls — 1Soldering jewellery with amber, opal or pearls — 2

Why we don't take it on

Amber, opal, pearls, coral and turquoise are sensitive to heat: soldering temperatures make them crack, cloud or lose colour. Soldering such a piece with the stone in place is a big risk.

What we can offer

We remove the stone, repair the metal and set the stone back, or use laser soldering where it is safe. We'll tell you what is possible after inspection.

ZL Serwis Biżuterii on social media

Before and after: soldering, rhodium plating, resizing. See how we repair jewellery on Instagram, TikTok, YouTube and Facebook.

Jewellery repair in central Warsaw

ZL Serwis Biżuterii is the jewellery repair service of ZL Jewelry. We accept repairs in two places: at the ZL Jewelry manufactory at ul. Marszałkowska 64 (Śródmieście), where our master jeweller works, and at the KiANIT Jewelry wedding ring salon in Browary Warszawskie, ul. Grzybowska 43A. Open Monday to Saturday, 10:00–19:00, and on trading Sundays. We repair gold, silver and platinum jewellery: chain and bracelet soldering, ring and wedding band resizing, replacing clasps, posts and springs, re-securing stone settings, polishing, rhodium plating and laser engraving.

Most customers come in with a broken chain, a ring that has become too big or too small, a lost stone or white gold that has lost its shine. Chain soldering starts from PLN 70, including local polishing and ultrasonic cleaning. Resizing a wedding band without stones — from PLN 50. Rhodium plating brings back the shine of white gold and protects silver from tarnishing.

Our repair service works out of the ZL Jewelry manufactory, so we take on repairs of any complexity. For delicate pieces with stones we use laser soldering: it doesn't heat the stone and leaves no marks. If a part is missing, we make a new one — from a bail or clasp to a ring shank or stone setting — in the right size and fineness.

In a hurry? Most repairs are done within 1–5 working days. To skip the wait, book a visit online: pick a day and time and the master will inspect your piece straight away. We give you the price before we start — no surprises.

Not in Warsaw? We accept repairs by post from all over Poland: our manager will explain how to pack your jewellery, and we'll return the finished piece by insured delivery.

We serve customers in Polish, Ukrainian, English and Russian.